Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on BMW Series 6

Model: BMW Serie 6 E64, E63 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Warning light – error code

See other generations:
Video tutorial

This tutorial shows you how to reset the maintenance light on a BMW Series 6, model E63, produced from 2003 to 2011. First, turn on the instrument cluster without starting the engine. Next, press and hold the button on the left side of the speedometer until you enter the service menu.

Then, press the same button again until you reach the oil light icon. Once there, keep the button pressed until the reset request appears, and finally confirm the reset by pressing and holding the same button again.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to Remove the External Door Handle of a BMW 6 Series
How to Remove the External Door Handle of a BMW 6 Series
BMW Serie 6 (2003-2011 / E64, E63) Before you start, open the door of your BMW 6 Series. Pull and hold the external door handle. Meanwhile, unscrew and remove the screw that secures th…
How to Remove the Front Door Panel of a BMW 6 Series
How to Remove the Front Door Panel of a BMW 6 Series
BMW Serie 6 (2003-2011 / E64, E63) The instructions in this guide will illustrate the procedure for removing the front door panel of a BMW 6 Series. First, open the front door of the v…
Where to Find the Fuse Box on a BMW 6 Series E63
Where to Find the Fuse Box on a BMW 6 Series E63
BMW Serie 6 (2003-2011 / E64, E63) If you haven't yet found the fuse box inside your BMW 6 Series E63, don't worry as below you will find all the instructions you need. First, turn off…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos