Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reprogram the BMW 3 Series Remote?

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Key

In this tutorial, you will see how to reprogram the BMW 3 Series remote, a very simple and quick operation to perform after replacing its battery, for example. First, enter the cabin, then insert the key, turn on the ignition, and turn it off five times in a row. Next, remove the key, hold down the unlock button for the doors, and simultaneously press the lock button three times in a row. After that, test the various functions to ensure the procedure was successful.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reprogram the Key of the BMW E46
How to Reprogram the Key of the BMW E46
BMW Serie 3 (1998-2006 / E46) This video shows the procedure to reprogram the key for your BMW 3 Series E46. The procedure takes less than 1 minute to complete. To reprogram the k…
How to Reprogram the Key for the BMW 3 Series E46
How to Reprogram the Key for the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) This video tutorial shows you how to reprogram the key for your BMW 3 Series E46. The procedure is simple. First, open the car, get in, and by pressi…
How to reprogram the key of a BMW 3 Series E46 version
How to reprogram the key of a BMW 3 Series E46 version
BMW Serie 3 (1998-2006 / E46) In this video we see how easily reprograms the key of a BMW 3 Series in its E46 version: we remind you that programming refers only to the use of cen…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos