Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the External Rearview Mirror

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Side mirror

To remove the external rearview mirror, you must first take off the door panel. Since there is a side airbag in the door, it is recommended to disconnect the battery located in the trunk. Once the battery is disconnected, remove the cap labeled SRS AIRBAG on the panel to unscrew the underlying screw, then remove the cover masking the front screw. Next, release the clips along the edges to complete the removal of the panel, disconnecting all connectors. At this point, detach the plastic cover located right at the mirror and unscrew the two fastening screws to remove it, pulling out the corresponding cable.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Outer Mirror Cap of a BMW 5 Series
Removing the Outer Mirror Cap of a BMW 5 Series
BMW Serie 5 (1995-2003 / E39) Today, you will see the instructions to remove and replace the outer mirror cap of the BMW 5 Series. First, move to the side of the vehicle and use p…
Disassemble the External Rearview Mirror
Disassemble the External Rearview Mirror
BMW Serie 5 (1995-2003 / E39) Once you remove the external rearview mirror from the door, you can completely disassemble it by separating all its components: start by disconnectin…
Remove the Mirror from an External Mirror on a BMW 5 Series
Remove the Mirror from an External Mirror on a BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) How to remove the mirror from an external mirror on a BMW 5 Series. Use a plastic or rubber trim tool: pry between the edge of the mirror frame and t…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos