Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Light Bulb

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light bulb

See other generations:
Video tutorial

Open the trunk and remove the cover on the right side wall corresponding to the rear light where you need to replace the bulb (the procedure for the left side light is the same except that the cover is on the opposite side of the light). Locate the bulb holder release mechanism, press the lever, and pull it out. Replace the burnt-out bulb by turning it counterclockwise.

Insert the new bulb by turning it clockwise. Now, repeat the same steps for reinstallation by following the reverse procedure.

The maintenance operation shown in the images is performed on a BMW 3 Series.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light Bulbs on the BMW 3 Series
How to Replace the Third Brake Light Bulbs on the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Follow these instructions to remove and replace the bulbs and housing of the third brake light on the BMW 3 Series. First, open the trunk or access t…
Removing the Third Brake Light on BMW 3 Series E92
Removing the Third Brake Light on BMW 3 Series E92
BMW Serie 3 (2005-2013 / E92, E90, E91) In today's tutorial video, you will learn how to remove the third brake light on a BMW 3 Series E92. First, access the rear of the car and detach the…
How to Replace the Third Brake Light Bulb on a BMW 320i F30
How to Replace the Third Brake Light Bulb on a BMW 320i F30
BMW Serie 3 (2012-2019 / F31, F30) This guide shows how to replace the third brake light bulb on a BMW 320i F30. First, access the rear seat of the vehicle and, using a trim removal to…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos