Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan on a BMW 3 Series?

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Blower motor

To replace the cabin fan on a BMW 3 Series, open the hood to gain access to the components inside the engine compartment. Just below the windshield, you will find a protective panel that must be removed by loosening its mounting screws. After removing this panel, you will locate a protective cover that also needs to be detached. Underneath it, you will find the cabin fan, which can now be disconnected and removed, replacing it with a new one.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin fan of the BMW 3 Series 330i
How to replace the cabin fan of the BMW 3 Series 330i
BMW Serie 3 (1998-2006 / E46) Today's main instructions will show us how to disassemble and replace the blower motor of the BMW 3 Series 330i. First, we open the car's hood and lo…
How to Replace the Cabin Fan Resistor on the BMW 3 Series
How to Replace the Cabin Fan Resistor on the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, you will see how to remove and replace the cabin fan resistor on the BMW 3 Series. First, get inside the vehicle on the passe…
How to Replace the Cabin Fan Resistor on a BMW 3 Series
How to Replace the Cabin Fan Resistor on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, you will learn the steps to remove the cabin fan resistor on a BMW 3 Series. First, get inside the vehicle and start by opening and re…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos