Do it yourself
Frequently asked questions about cars and motorcycles

To reset the service reminder on a BMW "Series 1" E87.

Model: BMW Serie 1 E82, E81, E87, MK 1 - Years 2004-2013
Part: Warning light – error code

In this video tutorial, we can see how it is possible to reset the service reminder on a BMW "Series 1" E87, following a few simple steps: the first thing to do is to perform vehicle maintenance, such as changing the engine oil and filters; after performing the DIY service, you need to get into the car, insert the key, and press the ignition button, at this point, the message regarding the service reminder appears on the display; to reset the reminder, simply press and hold the button located below the speedometer on the left (as shown in the video), until the KM appears on the display, now you need to press the button located on the left control lever until you find the RESET option, now hold down the button to perform the reset.

Posted on 22 October 2023 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 1 (2004-2013 / E82, E81, E87, MK 1) In this short and simple guide we will see how to reset the oil change routine maintenance service light on the BMW 1 Series E87, first generation. F…
BMW Serie 1 (2004-2013 / E82, E81, E87, MK 1) If you have just had your BMW 1 Series E87 serviced regularly and you want to manually eliminate the relative warning light that comes on on the inst…
BMW Serie 1 (2004-2013 / E82, E81, E87, MK 1) Before we can start, we will have to make sure that the service has actually been carried out, and then go and sit on the driver's seat of our BMW 1 …

Other guides you may be interested in

How to Replace the Rear Light and Bulbs on a Ford Focus Year 2000

To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order.

Watch the video!


by ScegliAuto

More videos