Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Starting a Car with an Emergency Jump Starter

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Accessory kit

See other generations:
Video tutorial

If for any reason your car won't start, you can use a portable emergency jump starter. This device provides the necessary power to the car and can start it if the battery is completely dead.

The jump starter is much more convenient than battery cables because the latter need to be connected to another vehicle. You can easily find one at any auto parts store.

It should be 12 V. Charge it for about eight hours and then take it to the car. Make sure to connect the red clamp to the positive terminal of the battery and the black clamp to the negative terminal, and you will be good to go.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to Open the Door of the BMW 3 Series and Start the Engine Even if the Remote is Dead
How to Open the Door of the BMW 3 Series and Start the Engine Even if the Remote is Dead
BMW Serie 3 (2019-2026 / G20) If the battery in the remote for your BMW 3 Series model G is dead, don't worry. The manufacturer has set up functions that allow you to open the doo…
Replace the Wheel on BMW 3
Replace the Wheel on BMW 3
BMW Serie 3 (2005-2013 / E92, E90, E91) Replace the car wheel if damaged. Here’s how to change it on a BMW 3. Open the trunk and take the wheel removal kit, which includes: jack, jack handl…
Replacing the Factory Radio with an Aftermarket Kit
Replacing the Factory Radio with an Aftermarket Kit
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video, see how to replace the factory radio with an aftermarket multimedia system using a specific kit. Removing the radio is not very simpl…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos