Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on BMW 3 Series E90

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Service warning light

In this new guide for your BMW 3 Series E90 (2005-2013), you will learn how to manually reset the service light that appears on the instrument cluster. First, get inside the vehicle and turn on the ignition. Next, press and hold the small button located below the speedometer on the left side of the cluster for a few seconds. Once you enter the new menu, navigate through it and find the oil icon. Finally, press and hold the button you used earlier again and wait for the reset to complete.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator on the BMW 3 Series E90 2011
BMW Serie 3 (2005-2013 / E91, E90, E92) If you own a BMW 3 Series e90 (2011) and want to learn how to manually reset the service light that remains on even after servicing your car, all you…
How to reset the service indicator light on the BMW 3 Series E90.
How to reset the service indicator light on the BMW 3 Series E90.
BMW Serie 3 (2005-2013 / E91, E90, E92) In the following guide, we will help you complete the procedure correctly and safely to manually reset the service indicator light on the display of …
How to Reset the Service Light on a BMW 3 Series E90
How to Reset the Service Light on a BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In this guide, you will find a clear and simple description to manually reset the service light on your BMW 3 Series E90. First, enter the vehicle an…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos