Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the TPMS on BMW 1 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Tire pressure warning light

This useful tutorial shows how to reset the TPMS, or tyre pressure warning light, on a BMW 1 Series, model 128i. Start by turning on the vehicle’s instrument panel, then, using the selector on the left side of the steering wheel, scroll through the menu options until you see the tyre pressure warning icon with the word "RESET". Once done, press the left lever button "BC" and then press it again, holding it down until the reset is complete, indicated by a tick next to the word "RESET".

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Light on a BMW 1 Series
Resetting the Tyre Pressure Light on a BMW 1 Series
BMW Serie 1 (2011-2019 / MK 2, F20, F21) These brief and simple steps will allow you to reset the tyre pressure light on a BMW 1 Series; before recalibrating the TPMS sensors, ensure all fou…
How to Reset the TPMS Light on a BMW 1 Series
How to Reset the TPMS Light on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To reset the TPMS light on a BMW 1 Series, turn on the ignition without starting the engine. Use the BC button on the indicator stalk to scroll throu…
How to reset the TPMS warning light on the BMW 1 Series
How to reset the TPMS warning light on the BMW 1 Series
BMW Serie 1 (2011-2019 / MK 2, F20, F21) Performing the reset procedure on the TPMS light has never been so easy thanks to this short video tutorial that illustrates the steps to reset the l…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos