Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the water pump on the BMW 120d

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Pump

See other generations:
Video tutorial

Today, with the help of this video tutorial, you will learn in detail how to replace the water pump on the BMW. This operation can be carried out independently. Start by opening the bonnet of the vehicle and, using a spanner, loosen the tensioner pulley and remove the belt from its seat.

Using a socket wrench, unscrew the tensioning bolt of the pulley, and as shown in the video, remove the water pump. Continue the job by fitting the new water pump and then reinstall all the other previously removed parts.

Close the bonnet, and the job is complete.


Updated on 1 September 2026 by ScegliAuto


Related tutorials

Replacing the Auxiliary Belt of the BMW 1 Series 120d
Replacing the Auxiliary Belt of the BMW 1 Series 120d
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) This guide provides instructions for removing and replacing the auxiliary belt of the BMW 1 Series 120d. First, open the engine bonnet and remove the…
Replace the Key Battery for BMW 120D E87
Replace the Key Battery for BMW 120D E87
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Changing the remote battery is necessary when the central locking of your BMW 120d stops functioning with the remote control. In this tutorial, you w…
How to Recognise the Noise of the Timing Chain on a BMW 1 Series 120D N47
How to Recognise the Noise of the Timing Chain on a BMW 1 Series 120D N47
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this short video, you will understand how and when to notice the noise of the timing chain on the first generation BMW 1 Series, particularly on t…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos