Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in a BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Antifreeze coolant

See other generations:
Video tutorial

In this tutorial, you will see how to replace the coolant in a BMW 3 Series, a very simple and quick operation. First, wait for the engine to be completely cool, then lift the front of the vehicle, locate the drain plug, and unscrew it. Allow all the coolant in the system to drain out, disconnect the indicated hose to remove any remaining residue, and reassemble everything.

At this point, just pour in the new coolant through the upper opening, start the engine, and if necessary, top off again.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

How to Top Off the Coolant on BMW 3 Series
How to Top Off the Coolant on BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Learn how to top off the coolant on a BMW 3 Series yourself to save on labor costs. First, pull the plastic lever located at the bottom left of the d…
How to Bleed the Cooling System on BMW 3 Series E90
How to Bleed the Cooling System on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video tutorial, you will learn how to bleed and replace the coolant or antifreeze on the BMW 3 Series E90 by following these simple steps. Fi…
How to top off the coolant in the BMW 3 Series?
How to top off the coolant in the BMW 3 Series?
BMW Serie 3 (2012-2019 / F31, F30) In this tutorial, you will see how to check and top off the coolant in the BMW 3 Series, a very simple and quick operation. First, ensure that the en…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos