Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the AdBlue light in the BMW X5?

Model: BMW X5 F15 - Years 2013-2018
Part: AdBlue warning light

If the AdBlue warning light has turned on in the instrument panel of our BMW X5, it means that the pollution control liquid has reached a too low level and therefore needs to be topped up. We can do this by following the simple procedure shown in this tutorial. First of all, let's purchase a 10-liter canister of urea from any car parts store, then turn off the engine and open the hood. Next, we locate the blue cap on the right side of the compartment, unscrew it, and insert the canister's tube into the hole. At this point, all that's left is to pour in the necessary amount of liquid and then drive a few kilometers.

Posted on 25 December 2023 by ScegliAuto

Video tutorial

Related tutorials

How to remove the AdBlue warning light in the BMW X5?
How to remove the AdBlue warning light in the BMW X5?
BMW X5 (2013-2018 / F15) If the AdBlue warning light in the instrument panel of our BMW X5 comes on, it means that the liquid in the anti-pollution system has reached the min…
How to reset the AdBlue warning light on the BMW X5?
How to reset the AdBlue warning light on the BMW X5?
BMW X5 (2007-2013 / E70) If the AdBlue warning light has come on in the instrument panel of our BMW X5, it means that the liquid in the anti-pollution system has reached the …
How and when to top up AdBlue in a 2015 BMW X5
How and when to top up AdBlue in a 2015 BMW X5
BMW X5 (2013-2018 / F15) In this video tutorial we can see how and when to top up the AdBlue liquid in a 2015 BMW X5: first you have to get into the car, start the engine, no…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos