Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Light on a 2019 BMW X1

Model: BMW X1 F48 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Service warning light

See other generations:
Video tutorial

To manually clear the oil change warning light on your 2019 BMW X1, follow these simple steps. First, enter the cabin and turn on the ignition.

Next, locate the button below the speedometer and hold it down for a few seconds. Once a new screen appears on the display, release the button.

At this point, press it multiple times until you see the oil life remaining on the display. Finally, hold it down again until the reset is complete.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

BMW X1 (2015-2022 / F48) This brief video guide shows how to reset the service light, which indicates the remaining life of the engine oil, on a BMW X1, specifically models p…
BMW X1 (2015-2022 / F48) Resetting the service light on a 2020 BMW X1 should not be a problem. To demonstrate this, we have included the video attached. You must perform the …
BMW X1 (2009-2015 / E84) In this tutorial, you will see how to reset the oil change light on a BMW 1 Series, a very simple operation to perform only after completing all sche…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos