Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a BMW X1

Model: BMW X1 F48 - Years 2015-2022
Part: Service warning light

This brief video guide shows how to reset the service light, which indicates the remaining life of the engine oil, on a BMW X1, specifically models produced from 2016 to 2018. First, turn on the vehicle's ignition without starting the engine, then press and hold the button on the left side of the speedometer to enter the service menu. Here, press and hold the same button again on the oil maintenance option. After that, a request to perform the reset will appear, so confirm it again with the same button to complete the process.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a BMW X1
How to Reset the Service Light on a BMW X1
BMW X1 (2015-2022 / F48) To manually reset the service light on your BMW X1, only a few steps are needed. With the following method, you also do not need to use any diagnosti…
How to Reset the Service Light on a 2017 BMW X1
How to Reset the Service Light on a 2017 BMW X1
BMW X1 (2015-2022 / F48) To reset the service light on the 2017 BMW X1, first complete all maintenance tasks, such as replacing filters and topping off fluids. To reset the l…
How to Reset the Service Light on a 2020 BMW X1?
How to Reset the Service Light on a 2020 BMW X1?
BMW X1 (2015-2022 / F48) Resetting the service light on a 2020 BMW X1 should not be a problem. To demonstrate this, we have included the video attached. You must perform the …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos