Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Pressure Light in the BMW 1 Series?

Model: BMW Serie 1 MK 3, F40 - Years 2019-2026
Part:

Resetting the tyre pressure light in the BMW 1 Series, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure that you have restored the correct pressure in each tyre according to the instructions in the manual. Start by turning on the instrument cluster, then, using the central knob, first navigate to the notifications section and then to the "Tyre pressure menu". Next, select "Tyre settings", adjust the various options as needed, and on the "Tyre pressures" screen, select "Perform reset".

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 1 (2011-2019 / MK 2, F20, F21) In this tutorial, you will see how to reset the tyre warning light on a BMW 1 Series, a very simple and quick operation. Before doing this, ensure yo…
BMW Serie 1 (2019-2026 / MK 3, F40) In this tutorial, you will see how to reset the tyre warning light on the BMW 1 Series, a very simple and quick operation, to be performed only after…
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) As shown in this tutorial, resetting the tyre warning light on a BMW 1 Series is an extremely simple and quick operation. Before proceeding, ensure y…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos