Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the EGR Valve on a BMW 5 Series

Model: BMW Serie 5 F11, F10 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: EGR valve

See other generations:
Video tutorial

To replace the EGR valve on a BMW 5 Series, open the hood to access the components in the engine bay: it is located at the bottom left of the engine block, right below the exhaust manifold. By loosening the screws that secure it to its housing and disconnecting all the connectors attached to it, you can remove the old EGR valve from its housing to install the new one; the new valve must be secured in place and properly connected, ensuring everything functions correctly.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

How to Remove the EGR Valve from a BMW 5 Series?
How to Remove the EGR Valve from a BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) To remove the EGR valve from a BMW 5 Series, open the hood to access the components in the engine compartment. At the front, near the exhaust manifol…
How to Remove the EGR Valve from a BMW 5 Series?
How to Remove the EGR Valve from a BMW 5 Series?
BMW Serie 5 (2003-2010 / E60, E61) To replace the EGR valve on a BMW 5 Series, open the hood to access the components inside the engine bay. Once the hood is open, remove the plastic c…
Replacing the EGR Valve of the BMW 5 Series
Replacing the EGR Valve of the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) In this short video, we will review the main instructions to remove and replace the EGR valve of the BMW 5 Series. First, open the trunk and start by…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos