Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Identify Timing Chain Issues in the BMW 5 Series

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Timing belt

It is well known that choosing a car with a timing chain offers several advantages, especially in terms of reliability and maintenance: there is no scheduled replacement for the chain, and with regular oil changes, perhaps a bit earlier than the long-life schedule, you can indeed cover hundreds of thousands of miles. However, on newer models from the Bavarian manufacturer, several failures related to the timing chain have been reported, ranging from simple noise to breakage with serious consequences; essentially, the chain tends to stretch, causing it to hit the sliding guides, generating noise and potentially leading to failure.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Disassembling the Timing Chain on BMW 5 Series
Instructions for Disassembling the Timing Chain on BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, you will learn how to disassemble and replace the timing chain on a BMW 5 Series. We will focus on the main steps. First, open and lift the ho…
Remove and Replace the Timing Chain on BMW 5 Series
Remove and Replace the Timing Chain on BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Prepare to remove and replace the timing chain on BMW 5 Series: use a fixed wrench to loosen the chain tensioner roller and slide the chain out of it…
Removing the Timing Chain on BMW 5 Series Twin Power N20
Removing the Timing Chain on BMW 5 Series Twin Power N20
BMW Serie 5 (2010-2017 / F11, F10) In this video, see the instructions on how to remove and replace the timing chain on a BMW 5 Series Twin Power, as well as on other models with the N…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos