Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Battery of the BMW X1

Model: BMW X1 F48 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Battery

See other generations:
Video tutorial

Today, you will see the instructions to disassemble and replace the battery of the BMW X1. First, open the hood of the vehicle and start by removing the air filter box. Unscrew the side screws and disconnect the intake hose; then unscrew the screws of the longitudinal bar to remove it, as shown in the video.

At this point, unscrew the screws of the plastic side cover of the battery to gain access; now disconnect both battery terminals (positive and negative) to remove it, replacing it with the appropriate one.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a BMW X1?
How to Replace the Battery in a BMW X1?
BMW X1 (2015-2022 / F48) To replace the battery in a BMW X1, open the hood to access the components inside the engine compartment. The battery is located on the right side of…
How to Replace the Battery in a BMW X1?
How to Replace the Battery in a BMW X1?
BMW X1 (2015-2022 / F48) You can replace the battery in the BMW X1 by opening the hood to access the components inside the engine compartment. The battery is located to the r…
How do you replace the battery of the BMW X1?
How do you replace the battery of the BMW X1?
BMW X1 (2015-2022 / F48) The battery installed on board the BMW X1 can be replaced by opening the hood so that you can access the components located inside the engine compart…

    Frequently Asked Questions

    • X1 2015-2022 - Where is the emergency call battery located in the BMW X1? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos