Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the BMW X5

Model: BMW X5 E70 - Years 2007-2013
Part: Headlight bulb

Today we will see the main instructions that will allow us to disassemble and replace the headlight bulb of the BMW X5, in simple steps. First, we open the hood of the car and start removing the plastic cap protecting the bulbs; then we disconnect the electrical connector of the light and remove the bulb from the optical group, as shown in the video. At this point, we replace the bulb with the new one, of the correct type and having the same attachment; we fix it on the optical group and check its operation, finally fixing the plastic cap!

Posted on 13 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb of the BMW X5?
How do you replace the headlight bulb of the BMW X5?
BMW X5 (2007-2013 / E70) In order to replace the headlight bulb of the BMW X5, you need to open the hood so that you can access the components located inside the engine compa…
Removing the headlight bulbs on BMW X5
BMW X5 (2007-2013 / E70) Do we want to remove the headlight bulbs? Let's see the disassembly of the front headlight of a BMW X5. Lift the front hood, find the headlight inspe…
Disassembly of the front headlight of the BMW X5
Disassembly of the front headlight of the BMW X5
BMW X5 (1999-2006 / E53) Today's guide will show us how to dismantle and replace the front headlight and bumper of the BMW X5, following the instructions below. First, we ope…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos