Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Cabin air filter replacement

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Cabin air filter
Operation: Cabin air filter replacement

Get the pollen filter of the same model identical to the original. The pollen filter purifies the air in the passenger compartment and is located in the engine compartment under the windscreen. To access the removal it is necessary to rotate the three hooks of the cover by turning them about ¼ of a turn. Remove the cover by lifting it. Once the filter cover has been removed, remove the filter from its housing only by carefully pulling it upwards to avoid the dispersion of dust. To do this, put a cloth on the bottom to collect the dirt. Put the new filter back into its housing paying attention to the direction of positioning and close the lid with the hooks.


Posted on 25 June 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Serie 3 2005-2013 - Where is the cabin filter of the BMW E90? Read Answer
    • Serie 3 1990-2001 - How much does the BMW E46 cabin air filter cost? Read Answer
    • Serie 3 2005-2013 - Where is the cabin filter of the BMW 320 F30-F31? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos