Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of the BMW 4 Series

Model: BMW Serie 4 F33, F36, F32, MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Rear bumper

See other generations:
Video tutorial

The following steps will show you how to remove and replace the rear bumper of the BMW 4 Series, following the instructions below. First, move to the back and open the trunk; then remove all the clips and screws located on the top and bottom of the rear bumper, unscrewing the additional screws found on both sides of the wheel wells, as shown in the video.

At this point, gently detach the bumper from the sides until it is completely removed, replacing it with the new one by applying the reverse procedure!


Updated on 4 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Bumper on a BMW 4 Series
How to Replace the Front Bumper on a BMW 4 Series
BMW Serie 4 (2013-2020 / F33, F36, F32, MK 1) Hello, in this video you will see how to remove the front bumper from the beautiful BMW 4 Series. It is quite a complex procedure. First, it is advis…
How to Remove the Rear Seat of the BMW 4 Series?
How to Remove the Rear Seat of the BMW 4 Series?
BMW Serie 4 (2013-2020 / F33, F36, F32, MK 1) To remove the rear seat of the BMW 4 Series, you need to pry up from the central lower part of the seat, so that the front part can be lifted. Once t…
How to adjust the handbrake of the BMW 4 Series
BMW Serie 4 (2013-2020 / F33, F36, F32, MK 1) In this short guide, we will see the main instructions on how to adjust the handbrake of the BMW 4 Series. First of all, get into the car and start b…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos