Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel of the BMW X3

Model: BMW X3 MK 3, G01 - Years 2017-2024
Part: Door trim panel

When you need to perform internal maintenance on the door panel of a 2019 BMW X3, you will need to remove it from its seat and only then proceed with any repairs to the speakers or window switch, and so on. To remove the panel, we must first remove the central locking handle, once this is removed you can unscrew the screws on the back and unhook the panel from the door, be careful during this operation not to pull too hard or you could damage the central connector that will need to be removed. To mount the panel, you will need to perform the same procedure in reverse.

Posted on 5 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Remove the Door Panel on BMW X3
Remove the Door Panel on BMW X3
BMW X3 (2003-2010 / MK 1, E83) Is the door panel (driver side) on your BMW X3 damaged? Here’s how to replace it. Use a screwdriver to remove the plastic screw covers from the panel…
How do you remove the door panel of the BMW X3?
How do you remove the door panel of the BMW X3?
BMW X3 (2010-2017 / MK 2, F25) To remove the door panel of the BMW X3, you need to loosen the screws that hold it in place: it is fixed by two screws located in the central lower p…
Removing the Door Panel on BMW X3
Removing the Door Panel on BMW X3
BMW X3 (2003-2010 / MK 1, E83) Remove the door panel from the BMW X3. Take off the plastic covers above the panel. Remove all the screw covers and the internal handle cover. Unscre…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos