Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Door Panel of a BMW X3

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Door trim panel

In today's video, you will see how to remove the rear door panel of a BMW X3. Open the door and gather plastic trim tools and a screwdriver. First, pry off the plastic piece of the handle to remove it, then take off the plastic of the armrest handle. Next, unscrew all the screws located under the removed pieces using a Torx T20 screwdriver. Once done, start releasing the door panel by prying at the edges in multiple spots to detach all the rear clips. Finally, disconnect the electrical connector at the back!

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW X3 (2003-2010 / MK 1, E83) Remove the door panel from the BMW X3. Take off the plastic covers above the panel. Remove all the screw covers and the internal handle cover. Unscre…
BMW X3 (2003-2010 / MK 1, E83) How to remove the rear door panel of the BMW X3? Let's see how to take it off the door. Use a trim tool to pry up the plastic covering of the handle …
BMW X3 (2003-2010 / MK 1, E83) Is the door panel (driver side) on your BMW X3 damaged? Here’s how to replace it. Use a screwdriver to remove the plastic screw covers from the panel…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos