Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X3
    4. : How to disassemble and replace the external rearview mirror of the BMW X3.

BMW X3 - Video tutorial

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Outside rearview mirror
Operation: How to disassemble and replace the external rearview mirror of the BMW X3.

Today in this guide, we will discover the main steps that will allow us to disassemble and replace the external rearview mirror of the BMW X3. First of all, we open the front door of our car and start dismantling and removing the door panel, unscrewing all the fixing screws; then we proceed to unscrew the fixing screws of the rearview mirror, in order to remove it from the outside, as shown in the video. At this point, we install the new external rearview mirror and finally adjust it, using the electric control panel!


Posted on 11 September 2023 by ScegliAuto

    Frequently Asked Questions

    • X3 2003-2010 - How much does the external rearview mirror on the driver's side of the BMW X3 cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos