Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the fuel tank of the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013

Opening the fuel flap of the BMW 3 Series is a very simple and quick operation to perform independently. You just need to open the vehicle and then press on the flap to open it. If the opening does not occur due to a broken opening system, you can solve the problem by replacing the button. To perform this operation, you will need to open the trunk and remove the side carpet, insert a flat-tip screwdriver into the side hole and open the flap. Remove the spring on the flap and insert the new one. Finally, test the operation of the flap.

Posted on 3 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to open the fuel door and cap of the BMW 3 Series
How to open the fuel door and cap of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Below we will see the instructions that will allow us to open the fuel door and cap of the BMW 3 Series. First of all, make sure that all the locks a…
Remove the Fuel Tank on BMW 3 Series E30
Remove the Fuel Tank on BMW 3 Series E30
BMW Serie 3 (1982-1992 / E30) In today's video, you will see how to remove the fuel tank from a first-generation BMW 3 Series E30. First, lift the vehicle, using jack stands if ne…
Guide to Removing the Fuel Tank of the BMW 3 Series
Guide to Removing the Fuel Tank of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) In this guide, you will find the main instructions on how to remove and replace the fuel tank of the BMW 3 Series. First, lift the vehicle and start …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos