Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Speaker of a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Speaker

Want to remove the inner speaker from the door of a BMW 3 Series? In this detailed video, you'll see how to quickly take it out from the door housing. To start: remove the plastic trim with a trim tool, then, using a screwdriver, unscrew the screws located in the door panel. Pry off the panel with the trim tool and remove it by hand. Disconnect the door handle with the attached wiring harness. Unscrew the speaker to be replaced from the previously removed door panel. Finally, reassemble everything in reverse order.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Door Speaker of a BMW 3 Series
How to Replace the Front Door Speaker of a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Before you can start, open the front door of your BMW 3 Series. Begin by removing the door panel; disengage and remove the inserts, then unscrew the …
How to Replace the Front Door Speaker of a BMW 3 Series
How to Replace the Front Door Speaker of a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Before you can start, open the door of your BMW 3 Series. Begin by prying off and removing the door panel inserts using a thin but sturdy tool. Once …
Speaker Removal Instructions
Speaker Removal Instructions
BMW Serie 3 (2005-2013 / E91, E90, E92) To remove the front speaker, you need to take off the door panel. First, detach the trim piece in the center of the panel to access the screws undern…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos