Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Airbag Module of a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Control unit

See other generations:
Video tutorial

In this video, let's see how to disassemble and remove the airbag module located in the center tunnel of a BMW 3 Series. Disconnect the battery cables located in the trunk of the car. Using a plastic trim tool, remove the center tunnel trim of your BMW. Position the gear shift knob vertically, then use the trim tool to remove the leather boot of the gear shift (disconnect the related clips).

Next, use the trim tool to pry at the edge of the center console. Once the trim is removed, disconnect all the power clips.

Unscrew the previously removed airbag module with a screwdriver. Install the new piece onto the trim and proceed with the rest of the assembly in reverse order.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Remove the Driver's Airbag Module from the BMW 3 Series 320d E90
How to Remove the Driver's Airbag Module from the BMW 3 Series 320d E90
BMW Serie 3 (2005-2013 / E92, E90, E91) This guide shows how to remove the driver's airbag from the BMW 320d E90. To disassemble the airbag module from the steering wheel, locate the small …
How to Remove the Steering Wheel of a BMW 3 Series E90?
How to Remove the Steering Wheel of a BMW 3 Series E90?
BMW Serie 3 (2005-2013 / E92, E90, E91) The video here shows how to remove the steering wheel of a BMW 3 Series E90, but the same procedure also applies to other similar models like E91, E9…
Where is the central locking control module located in the BMW 3 Series?
Where is the central locking control module located in the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) In this video, you can see where the central locking control module is located in the BMW 3 Series and how to proceed if you need to replace it, whic…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos