Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the rear lights of the BMW 2 Series?

Model: BMW Serie 2 F22 - Years 2013-2021
Part: Tail light

Eventually, there may arise the need to disassemble the rear light of your BMW Series 2, whether it be for cleaning the headlight, updating the bulbs, or other reasons. It is good to know that you do not necessarily have to go to a workshop, but you can easily do the job yourself. Opening the rear hatch, you will notice a plastic plate next to the headlight in question, held by two screws. Once these screws are removed, you will have access to other screws, which are the ones directly holding the headlight. After removing these last two screws, you can pull the optical group externally and disconnect the power supply cable connector.

Posted on 28 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear lights of the BMW 2 Series
How to replace the rear lights of the BMW 2 Series
BMW Serie 2 (2014-2021 / F45) The instructions in this guide will show us how to disassemble and replace the bulbs of the rear headlight of the BMW 2 Series. First, we open the re…
Where are the fuses located in the BMW 2 Series?
Where are the fuses located in the BMW 2 Series?
BMW Serie 2 (2013-2021 / F22) The fuses of the BMW 2 Series are located inside the appropriate boxes that are designed to contain them and are installed on the vehicle: in this ty…
How to disassemble the rear headlight of the BMW 2 Series
How to disassemble the rear headlight of the BMW 2 Series
BMW Serie 2 (2013-2021 / F22) In this guide, we will see the disassembly and replacement instructions for the rear taillight and its bulbs of the BMW 2 Series. First, we open the …

How to Install Roof Bars on a Fiat 500X

Learn how to equip your car with universal roof bars. Universal roof bars are used on cars with and without roof rails (fixed bars secured to the car roof). Install the roof bar kit as shown in the video with the bars calibrated according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once the width of the anchoring brackets is adjusted, tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, apply the safety caps on your Fiat.

Watch the video!


by ScegliAuto

More videos