Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the SOS battery of the BMW X1?

Model: BMW X1 F48 - Years 2015-2022
Part: Battery

In order to replace the SOS battery of the BMW X1, you need to lever with an object and detach the components that block the car's ceiling: at this point it will be possible to remove the handles on the top and also the interior light fixture. Now it will be possible to completely detach the ceiling and in the back it will be possible to locate the SOS battery: this can be disconnected from its seat so that the new one can be inserted. This can now be properly secured by reinserting the ceiling and fixing it back in place.

Posted on 28 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a BMW X1?
How to Replace the Battery in a BMW X1?
BMW X1 (2009-2015 / E84) You can replace the battery installed in the BMW X1 by opening the rear hatch to access the trunk area. Here, you will need to detach the carpet at t…
How to Replace the Battery in a BMW X1?
How to Replace the Battery in a BMW X1?
BMW X1 (2015-2022 / F48) To replace the battery in a BMW X1, open the hood to access the components inside the engine compartment. The battery is located on the right side of…
How to Replace the Battery in a BMW X1 F48
How to Replace the Battery in a BMW X1 F48
BMW X1 (2015-2022 / F48) In this video, see how to remove and replace the battery in a BMW X1 F48, second generation, by following these simple and quick steps. First, open t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos