Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find and How to Access the Fuse Box of a BMW X4?

Model: BMW X4 MK 1, F26 - Years: 2014, 2015, 2016, 2017, 2018
Part: Fuse box

See other generations:
Video tutorial

The fuse box of a BMW X4 is located on the right side of the trunk. To access it, open the trunk and locate the cover panel on the right side of the cargo area.

Lift or remove this panel to access the fuse box. The cover panel may be secured with clips or screws, so you might need to use a screwdriver or a similar tool to remove it. Once the panel is open, you will see the fuse box containing various fuses and relays.

Be sure to consult the owner's manual to identify the specific fuse you need to check or replace.

Replacing a blown fuse is a simple process: pull out the faulty fuse and insert a new one of the same amperage. After completing the replacement, close the cover panel and ensure it is securely fastened.

This procedure allows you to easily access the fuse box and troubleshoot any electrical issues you may encounter with your BMW X4.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

Where to Find and How to Access the Climate Control Fuse in a BMW X4?
Where to Find and How to Access the Climate Control Fuse in a BMW X4?
BMW X4 (2014-2018 / MK 1, F26) The climate control fuse in a BMW X4 is located in the fuse box situated in the trunk. To access this box, start by opening the trunk lid. Next, loca…
What is meant by the fuse diagram of the BMW X4 F26?
What is meant by the fuse diagram of the BMW X4 F26?
BMW X4 (2014-2018 / MK 1, F26) The fuse diagram, in general and not just referring to the BMW X4 F26, is the document that graphically shows which fuses are contained in the fuse b…
How to Replace the Cabin Air Filter of a BMW X4
How to Replace the Cabin Air Filter of a BMW X4
BMW X4 (2018-2025 / G02) Replacing the cabin air filter in BMW X4 vehicles can be done easily on your own as it is a simple and quick operation. The replacement does not requ…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos