Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter of a BMW X4

Model: BMW X4 G02 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Cabin air filter

See other generations:
Video tutorial

Replacing the cabin air filter in BMW X4 vehicles can be done easily on your own as it is a simple and quick operation. The replacement does not require special tools.

To access the air filter, remove the lower cover of the glove compartment on the passenger side. Sit in the vehicle and unclip the right and left clips to remove the bottom of the glove compartment and disconnect the connector of the central unit.

Remove the cover of the filter box flange to perform the replacement. Insert the new air filter and close the flange cover; then reconnect the central unit and reassemble the bottom of the glove compartment.


Posted on 7 June 2026 by ScegliAuto


Related tutorials

How do you replace the SOS system battery in the BMW X4?
How do you replace the SOS system battery in the BMW X4?
BMW X4 (2014-2018 / MK 1, F26) The BMW SOS device, specifically referring to the BMW X4, activates when an emergency situation is detected, such as a vehicle collision. Automatical…
Replacing the Manufacturer Emblem on the Steering Wheel of the BMW X4
Replacing the Manufacturer Emblem on the Steering Wheel of the BMW X4
BMW X4 (2014-2018 / MK 1, F26) Today, we will go over the instructions that will allow you to replace and install the manufacturer emblem logo on the BMW X4 steering wheel. First, …
How to Replace the Front Brake Pads on the BMW X4
How to Replace the Front Brake Pads on the BMW X4
BMW X4 (2014-2018 / MK 1, F26) You can replace the front brake pads on the BMW X4 by lifting the vehicle so that the wheels are off the ground. Once the wheel is lifted, loosen the…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos