Do it yourself
Frequently asked questions about cars and motorcycles

Where to Find the Cabin Air Filter on the BMW X6

Model: BMW X6 MK 2, F16 - Years 2014-2019
Part: Cabin air filter

The cabin air filter on the BMW X6 is located in a standard position for many BMW models, but access may vary depending on the production year. For the first generation (E71), it is found in the engine compartment, on the passenger side (right side for left-hand drive), under the windshield, covered by a large plastic grille cover. Access it from the hood; look towards the back of the engine compartment, near the ventilation grille under the windshield. You will find a plastic cover secured with clips; unlock them and lift the cover. Underneath is the filter. For the BMW X6 F16 (2nd generation) and G06 (3rd generation), refer to the video: it is located under the dashboard, passenger side, inside the HVAC housing. On the left side of the glove compartment, there is a side panel, under which you will find a plastic cover secured by screws. This is the housing cover. Remove the filter and clean the container: be careful as some versions may have two filters side by side, and both need to be replaced.

Posted on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW X6 (2007-2014 / MK 1, E71) Pull the lever and lift the hood, ensuring it stays in position. The cabin air filter, or pollen filter, is located near the windshield on the passen…
BMW X6 (2014-2019 / MK 2, F16) If the cabin air filter in your BMW X6 f16 (year 2014-2019) is excessively worn and you want to learn how to replace it quickly and safely, then you …
BMW X6 (2007-2014 / MK 1, E71) Remove the used diesel filter from a BMW X6. Lift the vehicle on a column lift. Remove the plastic cover that conceals the filter. Locate the filter,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos