Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the storage compartment drawer of the BMW X4

Model: BMW X4 MK 1, F26 - Years 2014-2018
Part: Glove compartment

Today's instructions will allow us to disassemble and replace the glove box of the BMW X4, in simple and quick steps. First, we get into the car and start unscrewing the fastening screws we find on the bottom of the glove box; then we open the glove box and unscrew the additional screws we find inside, as shown in the video. At this point, we disconnect the electrical connector of the light bulb to permanently remove the glove box, carry out the repair or replacement; then we reassemble everything!

Posted on 5 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter of a BMW X4
How to Replace the Cabin Air Filter of a BMW X4
BMW X4 (2018-2025 / G02) Replacing the cabin air filter in BMW X4 vehicles can be done easily on your own as it is a simple and quick operation. The replacement does not requ…
How to remove the external door handle of the BMW X4
How to remove the external door handle of the BMW X4
BMW X4 (2018-2025 / G02) The instructions provided in this guide will show us the process of disassembling and replacing the external handle of the rear door of the BMW X4, i…
How to Replace the Infotainment Display in a BMW X4
How to Replace the Infotainment Display in a BMW X4
BMW X4 (2014-2018 / MK 1, F26) Before you begin, sit in the driver's seat of your BMW X4. Start by prying out and removing the center air vents, then remove the buttons and disconn…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos