Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find and How to Access the Climate Control Fuse in a BMW X4?

Model: BMW X4 MK 1, F26 - Years: 2014, 2015, 2016, 2017, 2018
Part: Fuse box

See other generations:
Video tutorial

The climate control fuse in a BMW X4 is located in the fuse box situated in the trunk. To access this box, start by opening the trunk lid. Next, locate the fuse access panel, which is usually positioned on the right or left side of the trunk, behind a cover or lining.

Remove the cover by gently pulling it towards you. Once the panel is removed, you will find the fuse box. Inside the cover of the box, there is a diagram that identifies the position and function of each fuse. Look for the fuse associated with the climate control system, which will be clearly labeled.

Use a fuse puller, if provided, or pliers to remove the faulty fuse. Check the fuse to see if it is blown.

If necessary, replace it with a fuse of the same amperage. After replacing the fuse, reattach the cover of the fuse box and the access panel in the trunk.

Close the trunk lid and start the vehicle to check if the climate control system is functioning properly. Be sure to follow the specific instructions in your BMW X4 owner's manual to ensure a safe and correct procedure.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

Where to Find and How to Access the Fuse Box of a BMW X4?
Where to Find and How to Access the Fuse Box of a BMW X4?
BMW X4 (2014-2018 / MK 1, F26) The fuse box of a BMW X4 is located on the right side of the trunk. To access it, open the trunk and locate the cover panel on the right side of the …
How to Replace the Cabin Air Filter of a BMW X4
How to Replace the Cabin Air Filter of a BMW X4
BMW X4 (2018-2025 / G02) Replacing the cabin air filter in BMW X4 vehicles can be done easily on your own as it is a simple and quick operation. The replacement does not requ…
How to Replace the Infotainment Display in a BMW X4
How to Replace the Infotainment Display in a BMW X4
BMW X4 (2014-2018 / MK 1, F26) Before you begin, sit in the driver's seat of your BMW X4. Start by prying out and removing the center air vents, then remove the buttons and disconn…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos