|
Do it yourself
| |||
| ||||
Resetting the tire pressure on a BMW 3 Series
Model: BMW Serie 3
E91, E90, E92
- Years 2005-2013
In today's very short tutorial, we can see the entire procedure necessary to reset the tire pressure light on a BMW 3 Series, model 328i in production from 2005 to 2013. Before performing this procedure, it is essential to ensure the correct pressure of all four tires as indicated by the manufacturer, but let's see how to proceed now. Let's start by turning on the vehicle's ignition without starting the engine, then press the selection buttons on the left lever of the steering wheel until the display shows the word "RESET" with the icon of the pressure light. Then press and hold the "BC" button at the end of the lever until the arrow next to the word "RESET" disappears, and finally hold it down again until the checkmark appears confirming the completion of the reset.
Posted on 16 August 2024 by ScegliAuto
This video is currently unavailable
Related tutorials
BMW Serie 3
(2005-2013 /
E91, E90, E92)
These short and simple steps will show us how to disable the tire pressure warning on the BMW 3 Series; before resetting the TPMS sensors, it is nece…
BMW Serie 3
(2005-2013 /
E91, E90, E92)
The instructions in this guide will allow us to reset the tire pressure warning of the BMW 3 Series; before resetting the TPMS sensors, it is necessa…
BMW Serie 3
(2012-2019 /
F30, F31)
Today we are shown how to reset the tire pressure on a BMW 3 Series, F30 model produced from 2012 to 2019. Before performing this operation, it is im…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.075
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
