Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the tire pressure warning on the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tire pressure warning light

See other generations:
Video tutorial

These short and simple steps will show us how to disable the tire pressure warning on the BMW 3 Series; before resetting the TPMS sensors, it is necessary that all four tires are at the correct pressure. Then we get into the car and start the instrument panel; then we use the left command on the steering wheel to enter the onboard computer, until we reach the tire pressure option, as shown in the video.

At this point, we confirm and reset the TPMS sensors, thus clearing the tire pressure warning!


Posted on 22 December 2024 by ScegliAuto


Related tutorials

How do you reset the tire pressure warning light on the BMW 3 Series?
How do you reset the tire pressure warning light on the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To completely remove the tire pressure monitoring system warning light from the BMW 3 Series instrument panel, you will first need to adjust all the …
Resetting the tire pressure warning light on the BMW 3 Series.
Resetting the tire pressure warning light on the BMW 3 Series.
BMW Serie 3 (2005-2013 / E92, E90, E91) The instructions in this guide will allow us to reset the tire pressure warning of the BMW 3 Series; before resetting the TPMS sensors, it is necessa…
How do you reset the tire pressure warning light on the BMW 3 Series?
How do you reset the tire pressure warning light on the BMW 3 Series?
BMW Serie 3 (2012-2019 / F31, F30) To reset the tire pressure warning light of the BMW 3 Series, you need to inflate the tires until they reach the recommended pressure value: this val…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos