Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Buick
    3. :
  3. Encore
    4. : How to reset the engine oil light on a Buick Encore

Buick Encore - Video tutorial

Model: Buick Encore MK 2 - Years 2020-2024
Operation: How to reset the engine oil light on a Buick Encore

In this video tutorial we are shown the past to be able to reset the oil change light in a Buick Encore car. First we will have to get on board the car and turn on the instrument panel of the same; at this point, on the lever to the left of the steering wheel we will find the buttons through which we can access the car settings menu. We will therefore first press the menu button and then by rotating the selector with the arrows in the up/down direction we will be able to navigate between the different items. Select the wording info and then oil life and at this point press the set button at the end of the lever described above; keep the key pressed for a few seconds and then release, the reset will then be completed. It will be possible to verify the outcome of the operation by accessing the “info†section in the car manual again.


Posted on 27 May 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos