Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Xts
    4. : How do you remove the Cadillac XTS door panel?

Cadillac Xts - Video tutorial

Model: Cadillac Xts MK 1 - Years 2013-2019
Part: Door panel
Operation: How do you remove the Cadillac XTS door panel?

In order to remove the Cadillac XTS door panel, you need to detach the molding that is located along the entire panel, immediately below the window lifter button. Once this molding has been removed, it will be possible to unscrew all the screws placed under it, so that the panel can be detached from the inside of the door. At this point it will be possible to disconnect the connectors inside the panel, so that this is completely removed. Then it will be possible to connect the new one, placing it on the door and fixing it with the internal screws.


Posted on 19 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos