Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on the Cadillac CTS

Model: Cadillac Cts MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Battery

See other generations:
Video tutorial

If you intend to replace the battery on this vehicle, you can find simple instructions in this description and also check the tutorial video. In this vehicle, the battery is located in the rear trunk on the right side, so to access it, open the rear hatch and remove the plastic panel on the side.

Inside, you will find the battery; proceed to disconnect the negative terminal first, then the positive terminal, and then you can remove it from its housing. Next, take the new battery, place it in the compartment, and reconnect the positive terminal first, followed by the negative terminal.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of the Cadillac CTS
How to Replace the Key Battery of the Cadillac CTS
Cadillac Cts (2002-2007 / MK 1) Thanks to its simple and minimalistic design, replacing the key battery of the Cadillac CTS is quite straightforward and quick. Let's go through the …
How to Replace the Battery on a Cadillac CTS
How to Replace the Battery on a Cadillac CTS
Cadillac Cts (2008-2014 / MK 2) In this video tutorial, you can see how to replace the battery in a Cadillac CTS. The first step is to lift the hood and secure it with the prop rod.…
How to Replace the Key Fob Battery for the 2019 Cadillac CTS
How to Replace the Key Fob Battery for the 2019 Cadillac CTS
Cadillac Cts (2014-2019 / MK 3) When the remote for your 2019 Cadillac CTS stops working due to a dead battery, follow this procedure to replace it quickly and correctly. First, rem…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos