Do it yourself
Frequently asked questions about cars and motorcycles

Location and Replacement of the Cabin Air Filter on a Chevrolet Colorado

Model: Chevrolet Colorado MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Cabin air filter

See other generations:
Video tutorial

In this video, you will see where to find and how to change the cabin air filter on a Chevrolet Colorado. The filter is located on the passenger side, behind the glove compartment, and is secured with a series of plastic screws that you can remove with a screwdriver.

A cord is attached to the glove compartment to prevent it from being completely removed if you don't want to. Behind it, you will find the filter cover, which you can now easily remove for replacement. Clean the housing thoroughly to remove dust and debris, and when inserting the new filter, remember that the arrows should always point down, as that is the correct installation direction.

Now close the cover and reattach the glove compartment. The job is complete.


Updated on 23 October 2026 by ScegliAuto


Related tutorials

Chevrolet Colorado (2015-2022 / MK 2) To replace the air filter on a Chevrolet Colorado, open the hood to access the components inside the engine compartment. On the left side of the engi…
Chevrolet Colorado (2015-2022 / MK 2) As shown in this tutorial, replacing the cabin air filter in the Holden Colorado pickup is an extremely simple and quick task. Start by sitting in th…
Chevrolet Colorado (2015-2022 / MK 2) To replace the cabin air filter on this vehicle, take a look at the video images and read the instructions provided in this description. First, sit i…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos