Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in the Holden Colorado Pickup?

Model: Chevrolet Colorado MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Cabin air filter

See other generations:
Video tutorial

As shown in this tutorial, replacing the cabin air filter in the Holden Colorado pickup is an extremely simple and quick task. Start by sitting in the passenger seat, then open the glove compartment, grasp it by the bottom edge, and pull it towards you to detach it from the dashboard.

Once done, locate the long rectangular door, open it by unlocking the left clip, and remove the old filter from the housing. Finally, insert the new filter, making sure to respect the airflow direction, usually indicated along its edge.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

Where is the Oil Filter Located in the Chevrolet Colorado Pickup?
Where is the Oil Filter Located in the Chevrolet Colorado Pickup?
Chevrolet Colorado (2015-2022 / MK 2) In this video, you can see where the oil filter is located in the Chevrolet Colorado pickup and how to proceed if you need to replace it. This operat…
How to Reset the Service Light on the Holden Colorado
How to Reset the Service Light on the Holden Colorado
Chevrolet Colorado (2015-2022 / MK 2) Resetting the service light on the Holden Colorado is a very simple operation that you can easily perform on your own, especially with the help of ou…
How to Replace the Air Filter on a Chevrolet Colorado
How to Replace the Air Filter on a Chevrolet Colorado
Chevrolet Colorado (2015-2022 / MK 2) To replace the air filter on a Chevrolet Colorado, open the hood to access the components inside the engine compartment. On the left side of the engi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos