Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Oil Filter Located in the Chevrolet Colorado Pickup?

Model: Chevrolet Colorado MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Oil filter

See other generations:
Video tutorial

In this video, you can see where the oil filter is located in the Chevrolet Colorado pickup and how to proceed if you need to replace it. This operation includes an oil change. As shown, the filter is accessible from the engine compartment; it is located in the lower left area of the engine.

Before removing it, go underneath the vehicle, then loosen the drain plug bolt and let all the oil in the system drain out. Next, remove the filter using a long socket wrench, install the replacement, and reassemble everything. Finally, add the necessary amount of oil through the designated hole.


Updated on 14 August 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service Light on a Chevrolet Colorado Pickup?
How to Reset the Oil Service Light on a Chevrolet Colorado Pickup?
Chevrolet Colorado (2015-2022 / MK 2) As shown in this tutorial, resetting the oil service light on a Chevrolet Colorado pickup is a very simple and quick operation. Before proceeding, en…
How to Reset the Oil Service Light in a Chevrolet Colorado?
Chevrolet Colorado (2015-2022 / MK 2) In this tutorial, you will see how to reset the oil service light in a Chevrolet Colorado pickup. Before performing this simple and quick operation, …
How to replace the rear headlight bulbs in the Chevrolet Colorado pickup?
How to replace the rear headlight bulbs in the Chevrolet Colorado pickup?
Chevrolet Colorado (2015-2022 / MK 2) In this tutorial, see how to replace the rear headlight bulbs in the Chevrolet Colorado pickup, a very simple and quick operation. First, ensure the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos