Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs in the Chevrolet Colorado pickup?

Model: Chevrolet Colorado MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, see how to replace the rear headlight bulbs in the Chevrolet Colorado pickup, a very simple and quick operation. First, ensure the key is not in the ignition for safety, then open the truck bed door and unscrew the two indicated bolts with a T15 Torx wrench.

Once done, grasp the taillight, pull it towards you, and remove it from the body. Finally, extract the faulty bulb by turning it slightly counterclockwise and follow the reverse procedure to reassemble everything.

Use LED-type replacements when possible.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

Replacing the Headlights on a Chevrolet Colorado
Replacing the Headlights on a Chevrolet Colorado
Chevrolet Colorado (2004-2012 / MK 1) This guide shows you how to remove and replace the headlights on a Chevrolet Colorado, following the instructions below. First, open the hood of your…
Where is the Oil Filter Located in the Chevrolet Colorado Pickup?
Where is the Oil Filter Located in the Chevrolet Colorado Pickup?
Chevrolet Colorado (2015-2022 / MK 2) In this video, you can see where the oil filter is located in the Chevrolet Colorado pickup and how to proceed if you need to replace it. This operat…
How to Reset the Oil Service Light on a Chevrolet Colorado Pickup?
How to Reset the Oil Service Light on a Chevrolet Colorado Pickup?
Chevrolet Colorado (2015-2022 / MK 2) As shown in this tutorial, resetting the oil service light on a Chevrolet Colorado pickup is a very simple and quick operation. Before proceeding, en…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos