Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb on the Chevrolet Colorado

Model: Chevrolet Colorado MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Headlight bulb

See other generations:
Video tutorial

In today's video, you will see instructions on how to remove and replace the headlight bulb on the Chevrolet Colorado in simple and quick steps. First, open the hood of your vehicle and start by removing the plastic protective cover located at the back of the headlight; then disconnect the electrical connector of the bulb to remove it, as shown in the video.

At this point, install the new bulb, ensuring it is the correct type and has the same base (in this case, a new LED bulb is being installed); then reassemble everything!


Updated on 15 June 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb of the Chevrolet Colorado 2
How to replace the headlight bulb of the Chevrolet Colorado 2
Chevrolet Colorado (2015-2022 / MK 2) If you are looking for a simple and effective guide that helps you step by step in replacing the headlight bulb of your second generation Chevrolet C…
Replacing the Headlights on a Chevrolet Colorado
Replacing the Headlights on a Chevrolet Colorado
Chevrolet Colorado (2004-2012 / MK 1) This guide shows you how to remove and replace the headlights on a Chevrolet Colorado, following the instructions below. First, open the hood of your…
How to replace the rear headlight bulbs in the Chevrolet Colorado pickup?
How to replace the rear headlight bulbs in the Chevrolet Colorado pickup?
Chevrolet Colorado (2015-2022 / MK 2) In this tutorial, see how to replace the rear headlight bulbs in the Chevrolet Colorado pickup, a very simple and quick operation. First, ensure the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos