Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Chevrolet Colorado key remote control

Model: Chevrolet Colorado MK 2 - Years 2015-2022
Part: Key

In simple and short steps, we will see how to disassemble and replace the battery of the Chevrolet Colorado key remote. First of all, take the remote in your hand and start removing the back cover of the remote by levering on the sides with a thin screwdriver; then remove the battery inside, as shown in the video. At this point, install the new battery, of the correct type (in this case a CR 2032 3V); insert it in the correct direction and secure the plastic cover of the key, completing the replacement operation!

Posted on 11 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery on Chevrolet Colorado
How to Replace the Remote Battery on Chevrolet Colorado
Chevrolet Colorado (2004-2012 / MK 1) In this video tutorial, you can see how to replace the remote battery on Chevrolet Colorado. First, purchase a new remote battery, model: (Panasonic …
How to Replace the Key Fob Battery in a Chevrolet Colorado?
How to Replace the Key Fob Battery in a Chevrolet Colorado?
Chevrolet Colorado (2004-2012 / MK 1) In this tutorial, you will see how to replace the key fob battery in a Chevrolet Colorado, a very simple task. You will only need a small flathead sc…
How to change the battery of the remote control for the Chevrolet Colorado 3
How to change the battery of the remote control for the Chevrolet Colorado 3
Chevrolet Colorado (2023-2026 / MK 3) Below you will find the description of the entire procedure you need to follow if you want to complete the replacement of the small battery located i…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos