Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear door in the Chevrolet Cruze?

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Car door

See other generations:
Video tutorial

In this tutorial we can see how to disassemble the rear door in the Chevrolet Cruze, an extremely simple and fast operation. First of all, we open the front door on the side where we will be working, then we disconnect the large connector indicated.

We then open the door in question, locate the limit switch lever located in the central internal area and unscrew the corresponding bolt using a socket wrench. At this point, all that remains is to close the door, unscrew the four hinge bolts and, being careful not to let it fall, separate it from the body of the car.


Posted on 16 December 2024 by ScegliAuto


Related tutorials

Removing the Door Panel of the Chevrolet Cruze
Removing the Door Panel of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Below is the procedure to remove and replace the front door panel of the Chevrolet Cruze. First, open the front door and start by removing the plasti…
How to Replace the Door Lock Actuator on a Chevrolet Cruze
How to Replace the Door Lock Actuator on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) These simple steps will allow you to remove and replace the door lock actuator on the front door of a Chevrolet Cruze. First, open the front door of …
Removing the Lock on a Chevrolet Cruze
Removing the Lock on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Learn how to remove the lock from the door of a Chevrolet Cruze. Remove the cover from the opening handle, then unscrew the screws with a screwdriver…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos