Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on a 2000 Chevrolet Silverado

Model: Chevrolet Silverado MK 1 - Years 1998-2007
Part: Service warning light

The procedure to perform a reset of the service or oil light on a 2000 Chevrolet Silverado vehicle is as follows: - turn on the vehicle's instrument panel; - press the accelerator pedal three times quickly; - wait for the light to stop flashing; - turn off and on the vehicle's instrument panel; After completing the above steps, the light will turn off and may come back on at the next oil change or service, if the light does not turn off then it may be necessary to take the vehicle to a workshop for a computerized diagnostic check.

Posted on 27 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a 2016 Chevrolet Silverado
How to Reset the Oil Light on a 2016 Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) In this mini guide for your 2016 Chevrolet Silverado, you will learn how to manually reset the engine oil light with a few simple steps. First, enter…
How to Reset the Oil Light on a Chevrolet Silverado
How to Reset the Oil Light on a Chevrolet Silverado
Chevrolet Silverado (2019-2026 / MK 1) To complete the manual reset of the oil light on your new Chevrolet Silverado, follow the steps outlined in this guide. First, get into the vehicle a…
How to reset the oil light on the 2024 Chevrolet Silverado
How to reset the oil light on the 2024 Chevrolet Silverado
Chevrolet Silverado (2019-2026 / MK 1) To manually reset the engine oil light on your 2024 Chevrolet Silverado, simply follow the procedure described in our new guide. First, get into the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos