Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Corvette
    4. : How to disassemble the Corvette C4 panel

Chevrolet Corvette - Video tutorial

Model: Chevrolet Corvette - Years 1983-1996
Part: Door panel
Operation: How to disassemble the Corvette C4 panel

How to disassemble the Corvette C4 panel? Don't worry, let's see how to proceed together in this video. Before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. Remove the plastic coating of the handle with a lever, unscrew the internal door handle with a screwdriver, unscrew the screws placed in it (remove the push-button panel). Once all the screws have been removed: with the lever we detach all the plastic clips that block the door, remove the door panel, unhook any power supply terminals.


Posted on 16 November 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos