Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from the 2002 Chevrolet Aveo?

Model: Chevrolet Aveo MK 1, T200 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Car stereo

See other generations:
Video tutorial

Today, we will see how to remove the radio from the 2002 Chevrolet Aveo. To disassemble the radio without damaging the car's bodywork, use a plastic trim removal kit that can be purchased online. Using one of the tools from the kit, remove the radio cover to access the securing screws, which you will unscrew using a star screwdriver.

After unscrewing the screws, carefully extract the radio from its slot, being cautious not to pull too hard to avoid damaging the connector and the antenna lead. Disconnect the antenna cable and the electrical connector to remove the radio.

Installing a new radio follows the reverse procedure. Connect the antenna cable and the electrical connector to the new radio and insert it back into the slot.


Posted on 8 June 2026 by ScegliAuto


Related tutorials

How to disassemble the Chevrolet Aveo car radio
How to disassemble the Chevrolet Aveo car radio
Chevrolet Aveo (2002-2011 / MK 1, T200) Today we will discover the useful information for disassembling and replacing the original radio of the Chevrolet Aveo. First of all, we get into the…
How to Remove the Radio from a 2010 Aveo Dashboard
How to Remove the Radio from a 2010 Aveo Dashboard
Chevrolet Aveo (2002-2011 / MK 1, T200) Want to remove the radio from a Chevrolet Aveo for repairs? Let's take a look at removing the radio from the Aveo. Remove the trim around the radio u…
How to Remove and Replace the Radio in the Chevrolet Aveo
How to Remove and Replace the Radio in the Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) Briefly, here are the instructions to remove and replace the standard radio in the Chevrolet Aveo, following these simple steps. First, get inside th…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos