Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Maintenance Light on a Chevrolet Uplander

Model: Chevrolet Chevrolet Various
Part: Tire pressure warning light

Video tutorial

Let’s see how to reset the TPMS light on a Chevrolet Uplander that is already equipped with this feature. Ensure all tyres are inflated to the correct pressure, as indicated on the sticker on the driver’s door frame, then turn on the ignition.

Press and hold the LOCK and UNLOCK buttons on the remote for about 3-5 seconds. The horn will sound twice to confirm that the vehicle has entered "learning mode". Start with the front left wheel.

The corresponding indicator light will illuminate to confirm which sensor is awaiting the signal. To activate the sensor, you can use a TPMS activation tool or deflate the tyre for about 5-8 seconds until you hear a horn beep.

This sound confirms that the sensor has been matched to that position. Repeat the operation with the front right, then the rear right and rear left.

You will hear a double beep: you can turn off the ignition; the procedure is complete.


Posted on 19 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Chevrolet Uplander
How to Replace the Key Battery on a Chevrolet Uplander
Chevrolet Chevrolet Various Thanks to the rather minimal design of your Chevrolet Uplander key (2005-2008), replacing the battery inside is particularly simple and quick. Below,…
How to reset the service light on a 2005 Chevrolet Truck
How to reset the service light on a 2005 Chevrolet Truck
Chevrolet Chevrolet Various Today, we will explain how to reset the service light on a 2005 Chevrolet Truck. To perform this operation on the pickups, turn on four instruments w…
How to Reset the Oil Light on a 2014 Chevrolet Caprice
How to Reset the Oil Light on a 2014 Chevrolet Caprice
Chevrolet Chevrolet Various To reset the engine oil light on your 2014 Chevrolet Caprice, follow these steps. First, get in the car and turn on the ignition. Press the "Menu" bu…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos